Water level monitor (Internet) Apk
Apk Infos
| Version | 1.3 |
| Rating | 5.0/5, based on 1 votes |
| Size | 1.4 MB |
| Requires Android | Android 4.0+ (Ice Cream Sandwich) |
| Author's Notes | Water level (Fluid) monitoring and pump control over Internet (via ThingSpeak). |
About Water level monitor (Internet) APK
Table Of Contents
Description
****This is strongly recommended to have an account and know-how on https://thingspeak.com before using this application.Detailed description: This application is for people or hobbyists those want to monitor the level of water or any fluid and control the pump over the Internet (via ThingSpeak) from their Android phones either in automatic or manual way.
*This application receives the fluid level values over the Internet (via ThingSpeak). It needs an active internet connection with the ThingSpeak server that is supposed to keep the fluid level information sent by a micro-controller such as Arduino from fluid containing tank.
**Fluid level information sent by micro-controller over the Internet (via ThingSpeak) to iFluid application should contain integer values ranges from 0 to 100 based on the level of fluid in container.
Technical working:
1. (Hardware side): Hardware unit is supposed to contain various components i.e. Micro-controller such as Arduino, transistorized or ultrasonic based water level detection mechanism, Wi-Fi module such as ESP8266 or Ethernet module such as ENC28J60 to be connected with micro-controller and Internet gateway (Wi-Fi router/modem).
Working of iFluid application totally depends on the micro-controller based fluid level detection mechanism. Micro-controller will collect the fluid level information from fluid container using transistor based water level sensing mechanism or using ultrasonic sensor such as HC-SR04.
2. (Application side): Note that this application only accepts the fluid level information in terms of integer values those should range from 0 to 100. According to the current level of fluid in container, micro-controller sends the appropriate integer value (that should range between 0 to 100) to iFluid application over the internet to ThingSpeak server. For example, let us say if container is half filled with water then micro-controller is supposed to send integer value 50 to application.
*Make sure that you turned ON unlimited working internet connection (through mobile data or Wi-Fi) before using the application. When you will start the application, it will demand 16 digit READ API KEY, WRITE API KEY, CHANNEL ID, FIELD: FLUID LEVEL and FIELD: PUMP CONTROL. These four things are property of your channel (account) on ThingSpeak server.
WRITE API KEY is needed to send an appropriate command to the field of your channel (at ThingSpeak) over the internet that is supposed to keep commands to control the pump.
CHANNEL ID and READ API KEY is needed to receive the fluid level information from the field of your channel (at ThingSpeak) over the internet that is supposed to be sent by hardware installed at fluid container side at your home.
FIELD: WATER LEVEL is needed to identify particular field of your ThingSpeak channel that is supposed to keep the fluid level information sent by hardware installed at fluid container side at your home. iFluid application retrieves information of fluid from this field over the internet.
FIELD: PUMP CONTROL is needed to identify particular field of your ThingSpeak channel that is supposed to keep the pump command information sent by iFluid information over the internet either in automatic or manual way depending on your choice. Information from this field is supposed to be received over the internet by hardware installed at fluid container side to control the pump.
After typing required ThingSpeak oriented information press arrow button located in menu bar. You will receive notification after successful connection with ThingSpeak server and now you need to select the mode of pump control operation by pressing either AUTO or MANUAL radio button.
This app sends "11" to turn ON and "00" to turn OFF the pump.
Latest updates
What's new in version 1.3
Android version support.HTTP bug fix.
How to install Water level monitor (Internet) APK on Android phone or tablet?
Download Water level monitor (Internet) APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (aarsoftronix.com.ifluidthingspeak-v1.3-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.3 (5) | 1.4 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
