Connexo FieldSense Inspector Apk
Apk Infos
| Version | 2.3.7.0_2354 |
| Rating | 5.0/5, based on 1 votes |
| Size | 23.1 MB |
| Requires Android | Android 6.0+ (Marshmallow) |
| Author's Notes | The Inspector app is part of the Connexo FieldSense solution. |
About Connexo FieldSense Inspector APK
Table Of Contents
Description
Inspector is an Android app designed to communicate with Honeywell meters via RF interface (for meters connected to EnergyAxis or SynergyNet 900 MHz mesh network).To communicate to meters, the Inspector app uses a BeltClip radio module as RF gateway. The BeltClip module communicates to the Inspector app using Bluetooth and to the meters over 900 MHz mesh network (EnergyAxis or SynergyNet).
Inspector allows performing RF troubleshooting, reading, service and configuration operations. Example of RF troubleshooting operations are testing RF connectivity of the meters, locating nodes in range, and reporting RF signal strength.
Using Inspector, a field service personnel can:
Connect to a Metercat Server to receive settings and data that has been authorized by a system administrator for the specific user.
Execute meter functions (for example, ping node, locate registered nodes, read meters) as configured and authorized by a system administrator.
Connect to a Metercat Server to remotely and securely transmit the meter readings performed in the field.
Latest updates
What's new in version 2.3.7.0_2354
- Alpha 4 metering Gatekeepers with EnergyAxis mesh and Cat-M1 connectivity- Battery-powered gas/water communication module firmware 2.1 supported
- Beltclip Radio firmware 1.5 supported
- Enhanced efficiency of Inspector synchronization progress
- NXCM Cat-M1 gas module firmware 1.10 supported
- Fixed LANID/Serial Number sync issue for EnergyAxis meters
- NXCM R200 firmware 2.0 supported
How to install Connexo FieldSense Inspector APK on Android phone or tablet?
Download Connexo FieldSense Inspector APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.elster.inspector-v2.3.7.0_2354-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 2.3.7.0_2354 (203070) | 23.1 MB |
| 2.3.6.0_2162 (203060) | 23.1 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
