DIY Portable Apk
Apk Infos
| Version | 1.02 |
| Rating | 0.0/5, based on 1 votes |
| Size | 1 MB |
| Requires Android | Android 2.3+ (Gingerbread) |
About DIY Portable APK
Description
We will assume we are building off a monolific turn down slab, although framing off a block foundation is very similar with the exception of the seal plate being a 2x8 treated instead of a 2x4 treated. In both cases ½" anchor bolts should have been installed about 3" above the slab or blocks when the concrete was poured.WALL FRAMING
In most cases walls will be framed of 2x4's 16" OC unless the wall exceeds 10ft. then 2x6, s will be required. The bottom plate of the wall should always be treated, since it will be in direct contact with the slab or blocks. The top of the wall should be doubled, for extra strength. Corners should be triple 2x4's creating nailers for future interior finish.
Walls should be sheeted with OSB or ½" plywood. Most codes require that structural sheeting be nailed every 6in. along the edges and 8in oc in the center of sheeting.
HEADERS
Headers are simply the head piece for your framed opening, doors, windows, the size of these headers as determined by the with of the opening. for standard walk in doors and windows a double 2x8 is usually adequate. Garage doors also require headers but must be much more substantial, again based on the width, and placement. Garage door framed in gable ends will require less of a header, than those framed in the eve side, since the eve side will be carrying the roof loads. Garage door headers in the gable end are usually doubled 2x12's, those framed in eve side walls normally will require a double LVL type header. Most lumber yard can assist you in sizing your headers, just ask. All headers should have jack studs. Jack studs are studs that extend from the bottom plate to the bottom edge under your header.
ROOFS
You basically have two options here, trusses or stick framing. Trusses are simpler to use and very common in garage construction. Trusses are pre-engineered for structural and snow loads for your particular area.
Common installation allows for trusses to be set on 2ft. centers. You can have trusses built with the desired overhangs built in, which simplifies over hangs drastically. Stick framing will require that rafters be sized according to the span. A Ridge beam must be used when stick framing and should be a min. of one size larger than the rafters. The ridge beam is the peak member that the rafters are attached to at the top. When stick framing collar ties should be used to prevent the rafters from separating. Collar ties are attached from one side rafter to the other. Weather you are using trusses or stick framing gable bracing, which is angled from the gable wall back to the bottom cord or collar tie should be used. Roof sheeting is generally 7/16"OSB or ½" plywood. If your roof system is framed 2ft. on center plyclips should be used at the butt edges of roof, sheeting, to prevent sagging of the sheeting between rafter or truss bays.
How to install DIY Portable APK on Android phone or tablet?
Download DIY Portable APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.fibra.diyportablegarage-v1.02-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.02 (1) | 1 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
