MHD F+G Series Apk
Apk Infos
Version | version |
Rating | 4.7/5, based on 905 votes |
Size | 151.7 MB |
Requires Android | Android 5.0+ (Lollipop) |
Author's Notes | The MHD Flasher F+G Series is a complete flash tuning app for your BMW |
About MHD F+G Series APK
Table Of Contents
Description
The MHD Flasher F+G Series is a complete flash tuning app for your BMW & Toyota Supra A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance, maximum safety, and unrivaled drivability.---------------------------------------------
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G-Series app that connects via a MHD WiFi adapter and your vehicle’s OBD-II port, start the app and within 5 minutes the initial installation is complete. Further map changes are much faster - only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
---------------------------------------------
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:
N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
- Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
- Stage 2 (up to 390HP/580NM)
- Stage 2+ (up to 430HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
N55 PWG (pneumatic wastegate):
- Stage 1 (up to 340HP/540NM)
- Stage 2 (up to 370HP/580NM)
- Stage 2+ (up to 400HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
S55 (BMW M3 / M4 F8x):
- Stage 1 (up to 530HP/700NM)
- Stage 2 (up to 560HP/780NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%
B58:
- Stage 1 (up to 440HP/600NM)
- Stage 2 (up to 470HP/650NM)
- Stage 2+HPFP (up to 500HP/700NM)
- Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%
S58:
- Stage 1 (up to 630HP/750NM)
- Stage 2 (up to 700HP/850NM)
- Ethanol Mix Maps (up to 750HP / 880NM): Stage 1 & 2 E30+ Maps for - ethanol blends of 30%+
S63:
- Stage 1 (up to 720HP/900NM)
- Stage 2 (up to 780HP/950NM)
- Ethanol Mix Maps (up to 800HP/1000NM): Stage 1 and 2 Maps for ethanol blends of 30%+
N13:
Stage 1 (up to 200HP/280NM, 93oct/98RON)
Stage 2 (up to 235HP/350NM, 93oct/98RON)
---------------------------------------------
Full Data Logging and Live Gauges: Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
---------------------------------------------
These flash options can be applied to any map directly through the app:
- Anti Lag (N55/S55/N13 only at the moment)
- Exhaust Burble (duration & aggressiveness, min/max speed, min/max rpm)
- Remove top speed limiter (Vmax)
- CAN ethanol content reading (N55/S55/N13 only at the moment)
- Cold start noise reduction
- Exhaust flap open in sport mode
- Limit power per gear
- XHP TCU flash support (optimized OTS maps)
- Sport cooling mode for increased water / air intercooler cooling
- and many more
---------------------------------------------
Check out our homepage / user manual for more information, supported cars and recommended modifications for each stage.
Latest updates
What's new in version version
- Reverted S55 maps to 1.12.- MHD+ improvements supporting gen2 B58 / S58 1xxx whp vehicles.
- More vehicles / roms supported.
- Minor bug fixes.
How to install MHD F+G Series APK on Android phone or tablet?
Download MHD F+G Series APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.mhd.flasher.fseries-vversion-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
version (168) | 151.7 MB |
version (164) | 151.5 MB |
version (148) | 119.1 MB |
version (145) | 196.7 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required