ZZDrag Apk
Apk Infos
| Version | 1.1.0 |
| Rating | 5.0/5, based on 1 votes |
| Size | 2 MB |
| Requires Android | Android 4.1+ (Jelly Bean) |
| Author's Notes | Compute ballistic coefficients for multiple drag models from bullet dimensions. |
About ZZDrag APK
Description
The zzDrag app computes ballistic coefficients for multiple drag models by entering critical bullet dimensions measured with a micrometer or obtained from the manufacturer. The most appropriate drag model for the bullet is determined by comparing the ballistic coefficient values over a range of input bullet velocities. The drag model which produces the lowest standard deviation for the computed ballistic coefficient is the model which will most accurately predict bullet flight trajectory.The following drag models are used by zzDrag in the comparison described above:
G1 drag model - the standard drag model for bullets with a flat base and 2 caliber ogive.
G5 drag model - created for moderate (low base) boat tailed bullets with a 6 caliber tangent nose design.
G6 drag model - created for flat based bullets with a 7 caliber secant nose design.
G7 drag model - created for "Very Low Drag" boat tail bullets with a 10 caliber tangent nose design.
G8 drag model - created for flat base bullets with a 10 caliber secant nose design.
The app will display the best (mean) ballistic coefficient to be used for the bullet based on the velocity range over which is it is to be used. This requires the muzzle velocity and a terminal velocity. For example, if the bullet is to used for 1000 yard target shooting, the velocity at 1000 yards would be used as the terminal velocity. If, on the other hand, it is to be used for hunting deer sized game, the velocity at which the bullet falls below 1000 ft-lbs of energy may be a good choice for the terminal velocity.
The zzDrag app computes the amount of drag contributed by the bullets nose, skin, base, and boat-tail for any of the supported drag models over a range of velocity values. The core algorithms are those developed by Robert McCoy in his McDrag Basic program.
The bullet properties entered once are saved in an internal database for later recall. The bullet dimensions can be entered in inches, millimeters, or calibers.
Bullet stability is computed by zzDrag using the barrel twist rate, bullet properties including plastic tip length and environmental factors if desired. The environmental model used is the ICAO. The standard atmosphere can be used to compute pressure and temperature from elevation, or they can be entered directly in either English or metric units. Bullet stability is shown as the "s" output in the algorithms developed by Michael Courtney and Donald Miller in their paper "A Stability Formula for Plastic Tipped Bullets". S values less than 1 are shown in red as unstable. The "s" value cutoff value for stable is select-able as either 1.3 (bench rest), 1.5 (military), or 2.0 (extreme weather).
All reports can be written as either a csv (comma spaced values) file for import into a spreadsheet program or saved as a PDF (Portable Document File) for viewing on multiple hand-held or computer platforms.
Latest updates
What's new in version 1.1.0
Check for read & write permissions on post android 6 installations.How to install ZZDrag APK on Android phone or tablet?
Download ZZDrag APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.zeekzack.mcdrag-v1.1.0-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.1.0 (4) | 2 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
