ALTIVAR Wi-Fi Apk
Apk Infos
| Version | 1.2 |
| Rating | 4.3/5, based on 6 votes |
| Size | 215.2 KB |
| Requires Android | Android 1.6+ (Donut) |
| Author's Notes | New generation app tester for Altivar devices |
About ALTIVAR Wi-Fi APK
Table Of Contents
Description
ENG:App tester ALTIVAR devices via TCP / IP protocol Modbus.
Connect via Wi-Fi with variable speed drives Altivar 32-61-71-Process.
With an access-point, connecting the Ethernet channel of the drive to the wireless network will be able to control the motor.
Using the ethernet card inserted in the drive (ATV32-61-71) or the integrated Ethernet port (ATV Process)
It is sufficient to perform a factory reset and then connect with the inverter.
Will be sufficient to know the IP address of the device, connect with the app (page LOG) and follow the instructions provided by the INFO page.
The application, identified the type of Altivar that is connected, it will allow you to configure (page SETUP) the drive with IO-Profile and by use of IO-Scanner service, then you will control the motor (page PILOT).
From REQ page you can read / write the values of the variables within the map data of the inverter.
NOTE: if You are in PILOT page and You go in another page You must returned in PILOT page before the time-out elapsed otherwise the ATV falls in communication error with the motor in stop.
In this case You must go in PILOT page and press the RESET FAULT button and then You will re-control the motor.
ITA:
App tester per ALTIVAR devices via TCP/IP protocollo Modbus.
Connettersi via Wi-Fi con variatori di velocità gamma Altivar 32 - 61 - 71 - Process.
Per mezzo di un access-point, collegando il canale Ethernet del variatore alla rete wireless sarà possibile comandare il motore.
Utilizzando la scheda ethernet inserita nel variatore (ATV32-61-71) o la porta ethernet integrata (ATV Process) è sufficiente eseguire un reset di fabbrica e quindi collegarsi con con l'inverter.
Sarà sufficiente conoscere l'indirizzo IP del device, connettersi con l'app (pagina LOG) e seguire le indicazioni fornite dalla pagina INFO.
L'applicazione, identificato il tipo di Altivar a cui è connessa, consentirà di configurare (pagina SETUP) il variatore con il Profilo-IO e utilizzerà il servizio IO-Scanner per comandare il motore (pagina PILOT).
Dalla pagina REQ sarà possibile leggere/scrivere i valori delle variabili presenti all'interno della mappa dati dell'inverter.
NOTA: quando si è nella pagina PILOT e si esegue un cambio pagina è opportuno ritornare prima che il time-out scada e il motore si ferma. Se accade cio' sarà sufficiente ritornare nella pagina PILOT eseguire un RESET FAULT e riprendere il controllo del motore.
Latest updates
What's new in version 1.2
ENG:This latest version has been introduced the “keeping communication” until the application is closed.
In this way, the device does not go into standby mode (sleep state) until you press the exit button.
ITA:
In questa ultima versione è stata introdotta la “retentività della comunicazione” fino a quando l’applicazione non viene chiusa.
In questo modo il dispositivo non entra più in stand-by finchè non si preme il pulsante di uscita.
How to install ALTIVAR Wi-Fi APK on Android phone or tablet?
Download ALTIVAR Wi-Fi APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (applicazione.cgo.atv.com-v1.2-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.2 (3) | 215.2 KB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
