Precitec ProCutter Apk
Apk Infos
| Version | 3.3.7 |
| Rating | 2.7/5, based on 67 votes |
| Size | 6.8 MB |
| Requires Android | Android 6.0+ (Marshmallow) |
| Author's Notes | Display the cutting head condition during operation and to query error messages. |
About Precitec ProCutter APK
Table Of Contents
Description
The Precitec ProCutter App is used to display the cutting head condition during operation and to query error messages. As an option the app can also be used to set some sensor value parameters. The app connects via Bluetooth with the laser head and shows the sensor values in different windows. There are seven different windows: connection, temperature, pressure, optics, errors, IO and system.• Connection: shows active Bluetooth devices in the network
• Temperature: shows the sensor values of the four temperature sensors
• Pressure: shows cutting gas pressure and purging air pressure
• Optics: looks different, because of different laser head types
- Normal: focal positions, potentiometer offset, diffused light, lens configuration.
- ZoomCutter: aspect ratio replaces the lens configuration.
- Manual: just diffused light is shown.
• Errors: shows active error messages. If no error exists, the screen is empty.
• IO: shows the IO-interface, with analogue voltages, currents and signals.
• System: laser head firmware version and serial number.
Besides, in the system window there is a button. This button starts the record of the measurement values. The measurement values are stored in a *.csv file, which is created in the memory of the used device. The App has two access modes, USER and OEM. The determination is regulated through two different PINs. Users with USER-rights can define the memory location and the sampling rate of the .csv file. Besides the USER can change his own PIN. The OEM can additionally configure thresholds for the laser head. Furthermore the OEM can change his own and the USER-PIN.
The functionality of the app could be restricted, because of different laser head firmware versions. The IO window is not supported with firmware lower than 2.0.0. Also the one-time PIN algorithm is not supported for firmware versions below 2.0.3. With this algorithm a one-time change of your PIN is possible, when the PIN was forgotten or wrong entered.
The App works just as a display when the laser head is connected through CAN. It is not possible to change any thresholds with the App and the IO window is hidden.
The manuals in English and German versions are delivered in the pdf-format within the app. During the first start of the app, after approving the GTC, both versions of the manuals will be stored in the download-section of the used device. Besides it is possible to open the manual in the settings of the app. Depending on the used language in the device the German or English version will be shown. To display the manuals a pdf-viewer is required.
Latest updates
What's new in version 3.3.7
Update: Resolved reported bugs and crashes. Supports newer Android versions.How to install Precitec ProCutter APK on Android phone or tablet?
Download Precitec ProCutter APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.precitec.procutter-v3.3.7-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 3.3.7 (29) | 6.8 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
