Intervalometer Apk
Latest version 4
27 Aug 2017
Apk Infos
| Version | 4 |
| Rating | 2.3/5, based on 10 votes |
| Size | 497.7 KB |
| Requires Android | Android 1.6+ (Donut) |
| Author's Notes | Intervalometer for creating time lapses & series selfies with wifi cameras |
About Intervalometer APK
Table Of Contents
Description
The Intervalometer was built for the Panasonic LUMIX TZ-xx cameras, but should work on quite a few other wifi enabled Panasonic cameras (please let me know if you have success with your model). I have tested on the TZ-60 and others have reported success with the cameras listed below, but most of the Panasonic range should be compatible. Many of these cameras do not have a time lapse feature built in and there is no way to take a series of photos at regular intervals. This is a shame. I built this app to enable time lapse functionality on these wifi cameras. In this newer version, as the time intervals are customisable, it's great for series selfies too!The app currently only supports Panasonic cameras, including LUMIX. Further cameras may be added in future if I can get access to them.
Please note, the app will instruct the camera to take the pictures at the specified intervals, it will not actually build the time lapse video for you (though it might in the future!). There are many other ways to do this. The main point of this app is to bring the functionality that is missing to these devices. See the end of the video here for a couple samples.
Instructions for use
Set your camera up as you want, with the settings you need for taking the images. Make a connection to your camera as you would do normally. This can be by touching the camera to the bottom of the device, connecting to it's wifi etc. Just do whatever you normally would to connect the camera to your device as if you were using the factory supplied app. Launch the Intervalveometer. Make sure the correct IP address is shown on screen (you can check this in settings, about, status, IP address. You are only interested in the first 3 sets of digits. The camera will most likely be the same with a .1 at the end, i.e. 192.168.42.1). The app will show the IP address your device currently has. The camera is likely the same, but with .1 at the end. Click the 'Test' button to check connectivity to the camera. If all OK, set the parameters as needed and click 'Go!' to start taking your images.
If you have a problem with missed or irregularly timed images on smaller durations, you are probably trying to capture too fast for your camera to process the last images. Some of these cameras are fairly slow. <7 sec on some might not be long enough for the camera to process the request/image. This is a camera limitation. The speed the camera can process the images will depend on the camera settings, speed of your SD card, if you are storing RAW, etc. Play with it and find what works best for your camera.
Use your favourite app to combine your images into a wonderful time-lapse and be sure to share them with the world.
Confirmed working on
TZ-60
DMC-LF1
TZ-70
Others will be listed here as confirmed, but most Panasonic wifi cameras should work
For a brief overview and a couple demos, see here https://youtu.be/v_u5mLrb7NQ
By way of a stupid mistake, this App was originally referred to as 'Intervalveometer'. This has been corrected to Intervalometer. It is still the same app and the app name in the code remains (as I cannot easily change that)
The test version will take up to 5 images. This is to enable you to test it with your camera prior to purchase. If it does not work for any reason on your device, send me your logs and I will see if I can enable support in future versions. This likely only applies to Panasonic cameras unless I can get API info on other manufacturers devices. The test version on it's own is pretty good as a multi capture selfie app...
WAKE_LOCK is used to prevent your device sleeping (though the screen will still dim to save power), whilst the capture is occurring. It should be released once the capture is complete, or if you stop the capture.
Latest updates
What's new in version 4
minor screen layout fixes for some devicesremove delay between frames from first frame, so only 'start delay' is effective before first frame
move start delay to after lens has extended, if needed
How to install Intervalometer APK on Android phone or tablet?
Download Intervalometer APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.PJSMobile.Intervalveometer-v4-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 4 (4) | 497.7 KB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
User's Reivew
1 ★Can't get it to connect with TZ70/ZS50. This is a camera listed as supported, but can't achieve connection with this app. Can connect fine using the Panasonic Imaging app, so the flaw seems to be here. IP address etc check out as correct on both ends, but app never passes connection test, just Apache timeout errors. Also getting warnings that app is for older version of Android. I'm on Pixel2 w/ Android 9, so maybe app needs update? Would gladly pay for this if it worked.
1 ★Doesn't work on OnePlus 6.
5 ★This app works without problems, it has made my TZ60 an even better camera. I can now do neat time lapse video's. Panasonic should have red face buy a camera that does not have this feature nor does their app. This developer deserves a round of drinks from Lumix owners.
5 ★Great program! Does what it claims and does it well! The dev is very responsive. Highly recommend! My camera: FZ2500.
1 ★Doesn't work
1 ★Disfunction app
Similar Apps
Top Apps
