Wireless Multimeter™ Apk
Apk Infos
| Version | 8.0 |
| Rating | 3.3/5, based on 23 votes |
| Size | 4.1 MB |
| Requires Android | Android 2.3+ (Gingerbread) |
| Author's Notes | The Wireless Multimeter App used to remotely monitor any 12 Volt battery system. |
About Wireless Multimeter™ APK
Table Of Contents
Description
Wireless Multimeter™ now with DatarecordingCURRENTLY OUT OF STOCK as of FEB 22, 2018
Application Description:
Please Note: This application is intended to be used with the Wireless Multimeter battery monitor hardware (OUT OF STOCK). If you do not have the WirelessMultimeter module, then a demo mode of the app is provided. The demo mode has manual adjustments for simulating volts, amps, and alarms, allowing an evaluation of the easy-to-use and functional battery monitor.
Once connected to the Wireless Multimeter via Bluetooth™, the app receives the values that the Multimeter has been recording from the battery. The app will display live Volts, Amps, Watts, AmpHours, ChargeHours, and Temperature. It will also display the minimum and maximum values of those parameters. Monitor all battery parameters including Voltage, Amps and Amphours with our convenient mobile device application. The mobile app displays the data in graph & numerical form. The app also has programmable alarms that can be set for too high or too low battery voltage, and alarms can be set for too high of charging or discharging current.
Hardware Description:
Purchased separately, The Wireless Multimeter is designed to be an easy-to-install battery monitor with wireless capability, that is weatherproof and permanently installed to the battery to measure voltage, current and temperature. Almost any battery or battery system that is accessible can have a Wireless Multimeter installed on it. Applications include but are not limited to: Golf Carts, RVs, Travel Trailers, Boats, Solar Systems, even battery powered vehicles and toys. Order directly from www.WirelessMultimeter.com
The stand-alone Wireless Multimeter module is designed to be permanently installed to any battery (7V to 20V) to measure voltage, amperage drain and charge current, and amp-hours discharged. The Wireless Multimeter also includes an ambient temperature sensor to monitor the condition of the battery location.
Features:
• Easy installation
• Extends battery life by showing you instantaneous power draw
• Diagnose battery problems such as unwanted battery drain.
• Measure VOLTAGE from +7.0v to +20v (+/-0.05v).
• Completely weatherproof and designed to be connected to batteries in harsh environments, and is tested from -40°F to +135°F
• Shunt not required! An internal current sensor measures up to +/- 30 Amps.
• External shunt sensor input (mV) for applications more than 30 Amps (virtually any shunt range is compatible and easily programmable, and available separately)
• Application displays multiple parameters including AmpHours, Watts and Charging time.
• Programmable alarms for under/over voltage and maximum current draw
• Continuously records battery data every second and stores the data every one hour for over 10 years
• Data stored includes Minimum and Maximum values of Voltage, Amps, Watts and Temperature (°C or °F)
• New for 2018! Datalog feature allows automatic recording of data at adjustable intervals of 1 second to 24 hours. Data is stored on your device in a CSV file for use in any spreadsheet program.
Designed for Camper and or Solar 12v systems, RV batteries, Golf Carts, Marine and Boat applications, and any battery system (min 7v to max 20v).
Permissions required: Set Alarm, Read contents of SD card (for saving alarm threshold values), access to Bluetooth (for communicating to the Wireless Multimeter). No other permissions required!
Latest updates
What's new in version 8.0
Release Dec30,2017 REV8.1 - fixed bug in strings that caused crashing.Release Nov19,2017 REV7.0
Added Datalogging, CSV file is saved in device storage that contains Time,Voltage,Amps,Amp-Hours,Charge-Time,and Temperature. WRITE_EXTERNAL_STORAGE permission will now be required.
How to install Wireless Multimeter™ APK on Android phone or tablet?
Download Wireless Multimeter™ APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.wirelesssensory.thewirelessmultimeter-v8.0-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 8.0 (9) | 4.1 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
