MultiSafe Apk
Apk Infos
| Version | 1.2.1 |
| Rating | 5.0/5, based on 1 votes |
| Size | 10.6 MB |
| Requires Android | Android 4.4+ (KitKat) |
| Author's Notes | Reliance Valves Multisafe App |
About MultiSafe APK
Table Of Contents
Description
The Reliance Valves Multisafe App allows you to remotely control and modify the Multisafeleak detection control valve and the Multisafe floor leak sensor. All functions for setting up of the product can be done through the App. In addition the app will receive notifications from the device(s) in case of a fault. The App can also be used to read statistics on water usage. The Reliance Valves Multisafe Leakage Detector Control Valve is an internet-enabled leakage protection system with intelligent water management. The Multisafe continuously measures the flow rate, pressure, water temperature and determines the water hardness. If the device determines that water consumption is unusually high, or running for a long period of time, it will shut-off the isolating valve. In addition it will do a microleakage test at regular intervals and will detect even the smallest of leaks. If the device is connected to the internet, an e-mail or text message will be given in case of a failure. All of the functions of the Multisafe Leakage Detector Control Valve can be seen and adjusted in the RWC app.• Constant system monitoring providing a safeguarding system to prevent water damage caused by system faults.
• The system includes an isolation valve that will automatically close if a leak is detected
• Fully settable on site to suit individual requirements
• Holiday mode intensifies the system monitoring
• Micro-leakage monitoring function
• Self learning mode monitors system behaviour over a number of days to build up a system profile.
• Includes temperature monitoring for frost protection
• Includes a water hardness monitor.
• Monitoring of all functions can be done on-line using the app, settings can be changed and the valve opened and closed. The Multisafe Floor Leak Sensor is used in critical places that require intensive monitoring. If this smart sensor detects water on the floor, room temperatures that are too low or excessive levels of humidity, an LED will flash and a loud warning signal will be given. If the floor sensor is connected via Wi-Fi then an alert will be also sent by e-mail, or by text message. The Floor Leak Sensor can also be connected to the System Leak Detector and if a water leak is detected a signal will also be sent to it to shut off the water. All of the functions of the Multisafe Floor Leak Sensor can be seen and adjusted in the RWC app.
• Intensive monitoring of moisture and temperature levels in critical areas.
• Can work as a stand alone system with an on-board alarm or connected to the internet with Wi-Fi.
• Fully settable on site to suit individual requirements
• Monitoring of all functions can be done on-line using the app, settings can be changed and the battery level checked.
• If connected to a system leak protector the floor sensor can instruct it to isolate the water supply
Latest updates
What's new in version 1.2.1
Support for Android 14.How to install MultiSafe APK on Android phone or tablet?
Download MultiSafe APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (de.consoft.rwc.connect-v1.2.1-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.2.1 (22) | 10.6 MB |
| 1.1.12 (21) | 9.7 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
