Power Alarm Pro Apk
Apk Infos
| Version | 1.0.6 |
| Rating | 4.0/5, based on 5 votes |
| Size | 1.9 MB |
| Requires Android | Android 2.3+ (Gingerbread) |
| Author's Notes | Power Alarm - anti theft - unplug power and alarm sounds |
About Power Alarm Pro APK
Table Of Contents
Description
This app is the same as the Power Alarm app but does not display any ads.Please see the Power Alarm SMS app if you want a version of the app that does not display ads and sends an SMS and/or Email when the power is disconnected or connected.
Power Alarm is an anti-theft application for Android devices (phones and tablets). It provides a special level of security when charging your phone in public places (airport, hospital, office, etc.). When the alarm is activated, if your Android device is unplugged from its power source, Power Alarm vibrates and sounds an alarm. The app can also be used to notify you of a power outage. You would need to be within hearing distance for this to be useful. There is a version of the app (Power Alarm SMS) that will send a text message and/or email when power is disconnected and connected. The app can also be used to notify you (short sound) that the device has become fully charged. There is also a free version of the app (Power Alarm) that displays ads.
Features:
Power Alarm has two alarm states:
Enabled (red) - removal of power sounds the alarm.
Disabled (green) - removal of power does not sound the alarm.
Power Alarm has two battery charge notification states:
Enabled (red) - when fully charged, a short sound is produced.
Disabled (green) - when fully charged, no notification is produced.
The Power Alarm app does not have to be running for the alarm to sound. The alarm will sound even if the Android device is sleeping (screen is off). While sleeping, when the alarm is tripped (power removed), the device will wake up and display the unlock screen. Having an unlock password provides an added level of security.
The app displays power connection state (connected or disconnected). The state displays if the device is connected to a computer (USB) or wall outlet (AC). Many Android devices charge at reduced rate (1/2 amp) if connected to a USB source and at a faster rate (2 amps) when connected to AC (wall plug).
When the alarm is tripped, the Power Alarm app is shown automatically (after unlock) and displays the 'Silence' button. If you have set a password (in the settings), it must be entered correctly for the alarm to silence. While the alarm is sounding, the device's sound volume is set at max and cannot be lowered or muted. When the alarm ends, the original volume is restored.
While the alarm is sounding, reconnecting power stops the alarm (most likely action by a thief after unsuccessfully trying to lower the volume). The alarm can be enabled while power is not connected and the alarm will not sound (until power is connected and then disconnected). The alarm's enabled state is maintained even if the device is powered off (and rebooted). After reboot, if the alarm was previously activated and power is not connected, the alarm will sound. Note: some phones and versions of Android do not automatically sound the alarm unless power is connected and then disconnected after reboot.
The alarm can optionally (highly suggested) have a password set so silencing the alarm requires the entry of the password. This password is in addition to the wake up unlock password if present.
The alarm has a sound start delay setting where after the phone vibrates the alarm does not sound for the specified delay setting. If you forgot that the alarm is enabled, this enables you to re-connect power and stop the alarm from sounding.
The alarm has a duration setting after which the alarm ends without any other action. Other than the sound nuisance, stopping the alarm saves from the battery being drained.
There are 4 alarm sounds:
Voice (a human voice saying "Power Alarm" repetitively)
Siren 1
Siren 2
None (no sound)
The alarm always vibrates the device.
Latest updates
What's new in version 1.0.6
Kill app restarts alarm.How to install Power Alarm Pro APK on Android phone or tablet?
Download Power Alarm Pro APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.tbs.poweralarmpro-v1.0.6-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.0.6 (1) | 1.9 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
