Jetting CR125 Shifter Kart Apk
Latest version 2.4
03 Oct 2023
Apk Infos
| Version | 2.4 |
| Rating | 3.9/5, based on 12 votes |
| Size | 3.3 MB |
| Requires Android | Android 2.3+ (Gingerbread) |
| Author's Notes | Helps you get the best performance for shifter karts with Honda CR125 engines |
About Jetting CR125 Shifter Kart APK
Table Of Contents
Description
This app provides, for the current weather conditions and a given engine configuration (air filter type, pump type, etc.), a jetting recommendation for Stock Moto / Mod Moto shifter go-karts with Honda CR125 engines to get the best performance.In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended setup is shown. It's calculated depending on the weather conditions, the engine and track configuration given in the other tabs. For the carb config, the following values are given: main jet, needle type and clip position and pilot jet. Under the recommended main jet, the calculated real value with decimals is shown. Besides this information, the air density, density altitude and relative horsepower are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits to adapt to your concrete motor and carburetor.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you should set in this screen the information about your engine, carburator and track, that is, the class (Stock Moto or Mod Moto), the air filter type (clamp-on air filter, airbox with or without filter), the fuel feed system (pump-around, non pump-around), the oil mix ratio and the type of the circuit (sprint or road racing, short or long). Depending of the track type, the carburetion setup will be adapted.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
If you click in "More from developer" you can find the other karting tools from ISEnet:
- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Maranello, Birel, Intrepid, Energy, etc.
- Other carburation apps for go karts:
+ Rotax Max EVO and non-EVO.
+ IAME X30 & Leopard
+ Honda CR125 powered shifter go-kart.
+ Modena KK1 & KK1R
+ IAME Shifter, Screamer & SuperShifter
+ Yamaha KT100.
- Air Density Meter: if you don't find a specific jotting app for your engine, you can use this app to create jeting charts.
- Apps for MX bikes (KTM, Honda CR & CRF, Yamaha YZ, Suzuki RM, Kawasaki KX).
We're working in new carburetion apps for other kart motors (LKE, Maxter, TKM, Vortex, WTP, etc.) and a new tech apps for Alfano / Mychron visualization. Please send us and email if you want to be notified when these tools are published.
PERMISSIONS:
The application needs the next permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the configuration preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.
Latest updates
What's new in version 2.4
Improved service for obtaining weather information.Minor changes in user interface.
How to install Jetting CR125 Shifter Kart APK on Android phone or tablet?
Download Jetting CR125 Shifter Kart APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.isenet.jettingcr125shifterkart-v2.4-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 2.4 (1) | 3.3 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
User's Reivew
5 ★Excellent must have app. You need to read your piston to set your particular "correction factor" Be aware that it fetches the data from a weather station, and if those data are inaccurate, you will get wrong readings. So be aware of your "ballpark" figures, and retrieve weather data multiple times
3 ★... but you won't go fast either. No matter what settings I put in for weather, once it got to a certain outside temp main jetting stayed at 175. Way too fat for a 90 degree day. It'll keep you safe, but could flood you on a warm day like it did me.
1 ★I have tested this App for over 1 year and its never right. It's actually on the lean side main jet and Pilot jet. The needle does seem to be right. The WX interface works but remember that's WX info not from where your at by close by. The good news is the developer does allow custom tailoring via slider bars and once you adjust them to jetting that actually is correct the App is then very close. Good Luck
3 ★The weather data comes up, but it won't let you actually use it. Something is wrong with the app.
5 ★Tested at track with really good results. Maybe a little in the rich side by one size in the main jet.
4 ★It's been stuck on 175 jet since I got it months ago
4 ★This is a realy helpful app but unfortunately is off the mark on jetting. We race stock Honda CR125, sprint kart, with Swedetech power. Our actual jetting is significantly leaner than the app recommends. Example: app rec. 162 main, we are racing 148 main. This is beyond the fine tuning range (which is really cool) in the app. To make this app better: 1) Allow me to specify actual jetting at various conditions, and then use those to interpolate future recommendations. 2) Allow me to log actual jetting.
Similar Apps
More from this developer
Top Apps
