Log Dyno Horsepower CSV Dyno Apk
Apk Infos
Version | 1.08.08 |
Rating | 4.3/5, based on 107 votes |
Size | 1 MB |
Requires Android | Android 2.3+ (Gingerbread) |
Author's Notes | Measure Torque & Horsepower from your datalog (CSV files) with this dyno app |
About Log Dyno Horsepower CSV Dyno APK
Table Of Contents
Description
Measuring your car's torque and horsepower has never been easier, now that you can do it with the help of your mobile device and this digital Dyno. You just need to open one of your datalog of a pull, and Log Dyno will do the rest.You can use any CSV or MSL OBD datalog file that contains RPM data which is needed to measure Horsepower and Torque. You can also use SPEED data from GPS performance measurement devices such as VBOX and RaceBox and RaceBox mini.
From the torque curve, the app is also able to determine the optimal gear shift points to ensure maximum acceleration. This makes sure you know when to shift, so you always have the most possible power at the wheels.
Compare multiple measurements!
You can save each one of your Dyno measurements, and compare them, or just analyze them interactively.
What datalog files can be used?
● JB4
● MHD
● ProTool
● COBB
● ProTool
● Bootmod3
● and any other CSV datalog with RPM data or GPS Speed
This is the easiest way to have your torque and horsepower measured with a virtual dyno using only your mobile phone and your datalog. You can see if your mods or tune work right away, and compare them.
★Log Dyno has been compared to multiple real life dyno sheets, and measurements were spot on, with multiple different vehicles★
How does it work?
#1. Datalog your vehicle
Take the datalog just like a dyno pull, in one given gear, from low rpm to high rpm. Try to avoid wheelspin as it can cause spikes in the graph.
#2. Set up your vehicle data
The dyno app requires some data about your vehicle. You’ll be asked to set values for the following:
● Car Name
● Weight
● Tank Capacity
● Tire Size
● DT%
● Drag Coefficient
● Frontal Area
#3. Share the results!
You can share your results right from the virtual dyno measurement page to basically any app or post it to any social network or email it. Of course, you can just save the results in your phone gallery too.
For more detailed information, scroll down to the bottom of the description and see the User's Guide.
How accurate is the dyno measurement?
If you have set your vehicle data correctly, the results our dyno app gives will be the same as the results a real dyno will give you. Also, keep in mind that wheelspin may result in spikes in the graph. If you are unable to avoid it, you’ll still get accurate results, you just need to ignore the spikes.
The best thing about our dyno app is that you can see right away how your mods work after datalogging. Now, you don't have to go to the dyno if you want to measure any small modification or just never had your car's power measured. You can see right away how your mods or tune work after datalogging. You can dyno unlimited times and unlimited vehicles for the fraction of the price of a dyno measurement.
You have to set your car up, how much it weighs, its tire size, the gear ratios, and also what your car drag coefficient and frontal area are, which the app will help in determining.
Based on your car data and environmental values, the app calculates a torque and horsepower curve from the datalog, which you can analyze. The app also points out the peak values, and you will be able to see at what rpm you made the most torque and the most power.
Corrections:
● Uncorrected
● SAE J1349
● STD
● DIN 70020
● ISO 1585
Power Units:
● WHP
● BHP
● PS
● KW
Torque Units:
● LB-FT
● NM
At the wheels or at the crank
The app is widely used among N54 N55 and S55 Tuners with great results backed up by dyno runs.
You can datalog either via OBD or your piggyback tuner, all you need is a CSV file. You can also use a GPS device to datalog SPEED for measurement.
Facebook Group for Support/Questions and to share your results: Log Dyno Facebook Group
User's Guide
Latest updates
What's new in version 1.08.08
-General UpdateHow to install Log Dyno Horsepower CSV Dyno APK on Android phone or tablet?
Download Log Dyno Horsepower CSV Dyno APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.ProfiSoft.LogDyno-v1.08.08-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
1.08.08 (1) | 1 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required