NFC Demo App by SIC Apk
Apk Infos
| Version | 1.23 |
| Rating | 4.3/5, based on 27 votes |
| Size | 3.5 MB |
| Requires Android | Android 3.0+ (Honeycomb) |
| Author's Notes | The NFC applications on the smartphones. |
About NFC Demo App by SIC APK
Table Of Contents
Description
This application is used to demonstrate SIC4310 NFC Enabler development kits developed by Silicon Craft Technology Ltd. (SIC). The NFC Enabler (SIC4310) is a dual-interface ISO14443A RFID tag, interfacing with both RF and UART. NFC Enabler is designed to be used in a various types of applications such as home appliances, personal healthcare, sport and fitness devices, etc. The key challenge is to deploy a low-cost NFC tag instead of an expensive full functional reader IC and use smartphones as a hub of information. As a result, this concept will enable a tremendous number of NFC applications on the smartphones.See demos on our YouTube channel at https://www.youtube.com/user/SiliconCraft
Main features of SIC4310
- RF interface based on ISO14443A at 106 kbps
- UART interface 9600 to 115200 bps
- 8 programmable GPIOs
- Activity indicator pins (RF detection, RF busy and power ready)
- 228-byte EEPROM accessible from RF and UART
NOTE:
The application only supports NFC Enabler SIC4310 ICs from Silicon Craft Technology.
The demo applications are as follows.
1. GPIOs control
2. LEDs control
3. Firmware upgrade through NFC
4. LCD control
5. Temperature sensor
6. File transfer
7. SIC commands
8. Melody
9. Interactive poster
10. E-ink Camera
11. Room Controller
12. NDEF editor
The development kits are provided in five different forms.
1. SIC4310-MC: a 12.5 x 19.7 mm micro module with a UART interface and 4 GPIOs
2. SIC4310-USB: a 12.5 x 37.3 mm tiny module with a USB interface
3. SIC4310-HV: an energy harvesting module with a UART interface and 3 GPIOs. The on-board inductive antenna can generate a current up to 10 mA.
4. SIC4310-HVU: an energy harvesting module featuring UART and USB interfaces and two LEDs that can be controlled via GPIO pins. The on-board inductive antenna can generate a current up to 10 mA.
5. SIC4310-FU: 47.6 x 107.9 mm ready-to-use kit featuring ARM Cortex M0 MCU, SIC4310, LCD, inductive antenna, two function buttons, temperature sensor, and connectors (I2C, SPI, UART, programming and debugging)
6. SIC4310-SP: a customizing board as e-ink, springboard etc.
Please contact support@sic.co.th if you have problems or feel free to contact us if you have any suggestions for additional features. This helps us to detect, analyze and fix possible issues you may encounter when using our demo application.
Version 1.0
Updated on Aug 26, 2013
Version 1.01
Updated on Aug 28, 2013
Version 1.02
Updated on Sep 2, 2013
Version 1.03
Updated on Sep 6, 2013
Version 1.04
Updated on Sep 12, 2013
Version 1.05
Updated on Sep 22, 2013
Version 1.06
Updated on Oct 14, 2013
Version 1.07
Updated on Oct 18, 2013
Version 1.08
Updated on Oct 28, 2013
Version 1.09
Updated on Dec 12, 2013
Version 1.10
Updated on Jan 13, 2014
Version 1.11
Updated on Jan 17, 2014
Version 1.12
Updated on Mar 21, 2014
Version 1.13
Updated on Apr 29, 2014
Version 1.14
Updated on May 5, 2014
Version 1.15
Updated on May 8, 2014
Version 1.16
Updated on May 9, 2014
Version 1.17
Updated on Jun 12, 2014
Version 1.18
Updated on Jun 26, 2014
Version 1.19
Updated on Jul 2, 2014
Version 1.20
Updated on Jul 18, 2014
Version 1.21
Updated on Aug 28, 2014
Version 1.22
Updated on Sep 9, 2014
Latest updates
What's new in version 1.23
Version 1.23 release+ Fixed some bugs.
+ Added Multi-NDEF Editor new version.
Version 1.22 release
+ Fixed some bugs.
+ Optimized timeout in Bootloader app.
+ Expanded a buffer of storing HEX file.
Version 1.21 release
+ Expanded timeout in Bootloader apps's erase mode.
Version 1.20 release
+ Fixed some bugs in Multi-NDEF Editor apps.
Version 1.19 release
+ Fixed some bugs in Multi-NDEF Editor & SICCommands apps.
How to install NFC Demo App by SIC APK on Android phone or tablet?
Download NFC Demo App by SIC APK file from ApkClean, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.sic.demo-v1.23-ApkClean.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
Older Versions
| 1.23 (30) | 3.5 MB |
Questions & Answers
Q: What is an APK File?
A: Just like Windows (PC) systems use an .exe file for installing software, Android does the same. An APK file is the file format used for installing software on the Android operating system.
Q: If I install an APK from this website, will I be able to update the app from the Play Store?
A: Yes, absolutely. The Play Store installs APKs it downloads from Google's servers, and sideloading from a site like ApkClean.net goes through a very similar process, except you're the one performing the downloading and initiating the installation (sideloading).
As soon as the Play Store finds a version of the app newer than the one you've sideloaded, it will commence an update.
Q: Why ApkClean.net can guarantee APK 100% safe?
A: Whenever someone wants to download an APK file from ApkClean.net, we'll check the corresponding APK file on Google Play and allow user download it directly (of course, we'll cache it on our server). If the APK file does not exist on Google Play, we'll search it in our cache.
Q: What are Android App permissions?
A: Apps require access to certain systems within your device. When you install an application, you are notified of all of the permissions required to run that application.
Don't hesitate to contact us if you have any questions or concerns.
(*) is required
